| 检查井盖模具适用范围 |
| 添加时间：2019/11/4 14:02:57 浏览次数： |
| 检查井盖模具适用范围 Application scope of manhole cover mould 1）一般土质、 软土土质、 季节性冻土土质和 湿陷性黄土土质条件下的塑料排水检查井施工； 1) construction of plastic drainage inspection well under the conditions of general soil, soft soil, seasonally frozen soil and collapsible loess soil; 2）一般车道的地面荷载按汽车总重15t（后轮压5t）；消防车道的地面荷载按汽车总重30t（后轮压6t）设计。 2) the ground load of general Lane shall be designed as per the total weight of vehicle 15t (rear wheel pressure 5T); the ground load of fire lane shall be designed as per the total weight of vehicle 30t (rear wheel pressure 6T). 3）建筑小区（居住区、公共建筑区、厂区等）范围内埋地塑料排水管道外径不大于800mm、埋设深度不大于6m、不下井操作的塑料排水检查井工程的设计、施工和维护保养。 3) the design, construction and maintenance of the plastic drainage inspection well project within the scope of the construction community (residential area, public building area, plant area, etc.) with the external diameter of the buried plastic drainage pipeline not more than 800mm, the buried depth not more than 6m and the operation of not going down the well. 4）地下水位按地面下不高于1.0m设计； 4) the underground water level is designed to be no higher than 1.0m under the ground; 5）抗震设防裂度为9度及9度以下的地区。 5) areas with anti-seismic crack degree of 9 and below. |
| 上一页 模具双射成型的基本原理 |
| 下一页 塑料检查井适用的范围 |
Copyright © 技术支持：遨游网络