返回首页

保定市检查井模具厂

本站导航

新闻动态

当前位置:网站首页 > 新闻动态 > 详细信息
模具双射成型的基本原理
添加时间:2019/11/23 15:04:26     浏览次数:
双射成型主要以双射成型机两只料管配合两套模具按先后次序经两次成型制成双射产品.工作步骤:
Double injection molding is mainly to produce double injection products by two tubes of double injection molding machine and two sets of molds through two times of molding in sequence
1.A原料经A料管射入1次成型模制成单射产品A.
1. A raw material is injected into the material pipe a for one-time molding to form a single injection product a
2.经周期开模,产品A留于公模,成型机动模板旋转至B合模.
2. After periodic opening, product a is reserved in the male mold, and the molding motor-driven template is rotated to B to close the mold
3.B原料经B料管射入2次成型模制成双射成品,开模顶出.
3. B raw material is injected into B material pipe for 2 times to form a double injection finished product, which is ejected by opening the mold
上一页  混凝土预制压顶模具在生产中的注意事项  
下一页  检查井盖模具适用范围
  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3

Copyright © 技术支持:遨游网络

  • 联系我们
  • 网上订单
  • 工程案例
  • 本站导航

搜索

  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3